A influência do sistema nitrérgico no cultivo in vitro de embriões bovinos

O Óxido Nítrico (NO-) é uma molécula de sinalização celular que regula o desenvolvimento embrionário pré-implantacional. Nós investigamos o papel do NO- no cultivo de embriões bovinos produzidos in vitro, através do uso de N-Nitro-L-Arginina Metil Ester (L-NAME), um inibidor da produção de NO-, e L-arginina (ARG), um precursor de NO-, em diferentes períodos de cultivo (ativação do genoma embrionário e compactação). Foram avaliados seus efeitos sobre as taxas de desenvolvimento, cinética do desenvolvimento, qualidade embrionária, e expressão gênica. Os embriões foram produzidos por maturação e fertilização in vitro de oócitos aspirados de ovários provenientes de abatedouro frigorífico. No experimento 1, as taxas de desenvolvimento foram avaliadas em SOFaa na presença de L-NAME em diferentes períodos: do 1º ao 4º dia de cultivo (LN1-4), do 4º ao 8º (LN4-8) e do 1º ao 8º dia de cultivo (LN1-8). A inibição foi prejudicial a partir do 4º dia de cultivo (grupos LN4-8 e LN1-8), ao reduzir as taxas de eclosão (17,3%±13,44 e 13,7%± 14,51, respectivamente, p<0,05). Entretanto, o efeito mais negativo ocorreu do 1º ao 8º dia (LN1-8) em que a taxa de blastocisto foi significativamente menor comparada ao controle (29,4%±3,72 vs 47,8%±11,34, respectivamente, p<0,05). Por isso no experimento 2, a ARG (1, 10 e 50mM) foi adicionada desde o 1º dia de cultivo. As taxas de blastocisto usando 1 e 10mM de ARG foram similares ao controle (48%±13,03 e 34,2%±3,92 vs 49,4%±4,82, respectivamente, p>0,05), mas 50mM prejudicou a taxa de desenvolvimento embrionário (10,7%±7,24, p<0,001). No experimento 3, ARG a 1mM foi adicionada do 5º ao 8º dia de cultivo. Foram observadas taxas de desenvolvimento similares ao grupo GLN (somente com glutamina). Mas comparada ao controle (sem ambos os aminoácidos), rendeu melhores taxa de eclosão (54,8%±6,9 vs 41,4%±11,47, respectivamente, p<0,05) e qualidade embrionária (84,8%±2,63 vs 52%±8,62, respectivamente, p<0,05), mas não de taxa de blastocisto (49,4%±6,5 vs 49,4%±4,8, respectivamente, p>0,05). Neste período a produção de NO- foi positivamente correlacionada com a taxa de eclosão (R²=96,4%, p<0,001) e a qualidade embrionária (R²=75,5%, p<0,05). Adicionalmente, embriões foram cultivados na presença de L-NAME e ARG simultaneamente (grupo ARG/LN), do 5º ao 8º dia de cultivo, e os transcritos de OCT-4 e INT-t foram quantificados por PCR tempo real. Foi encontrada expressão similar de OCT-4 (p>0,05), mas redução de 1,8x e 1,5x de INT-t em relação aos grupos controles ARG e GLUT (p<0,05), respectivamente. Esses dados fornecem evidências da contribuição do NO-, principalmente no período entre os estágios de mórula e blastocisto, para a melhoria da eclosão e qualidade embrionária. A produção de NO- é requerida para o desenvolvimento pré-implantacional de embriões bovinos produzidos in vitro, e pode ser mediada pela suplementação do meio de cultivo com ARG.

Studies on bovine oocytes and ovarian tissues cryopreservation : fundamental and applied aspects

Tese de Doutoramento, Ciências Agrárias (Reprodução Animal), 26 de Junho de 2013, Universidade dos Açores.

Indução à ovulação pelo uso de LHRH análogo e fertilização artificial em rã-touro (Rana catesbeiana)

Este trabalho teve por objetivo aperfeiçoar a técnica de reprodução induzida existente para rã-touro, com o intuito de aumentar a taxa de fecundidade e viabilizar seu uso pelo produtor. As doses hormonais para a indução da ovulação e espermiação seguiram as propostas de FALCON e CULLEY (1995) e ALONSO (1997); entretanto, a técnica de fertilização artificial foi adaptada da metodologia para reprodução artificial de peixes com ovos não-aderentes (WOYNAROVICH e HORVÁTH, 1983). A técnica proposta apresenta as seguintes etapas: I) sincronização da ovulação e da espermiação, por meio de hormônio liberador de gonadotropina ((Des-Gli10, D-His(Bzl)6, Pro-NHEt9)-LHRH)); II) extração dos óvulos de cada fêmea (1 a 2 minutos); III) fertilização dos óvulos (2 minutos) com líquido espermático diluído em 100 mL de água; IV) hidratação dos ovos em 10 a 20 litros de água; e V) incubação dos ovos em quadros de tela de 1x 0,70 m, com malha de 1 mm. As taxas de fertilização obtidas com as modificações propostas foram superiores a 60%. Ressalta-se ainda que a técnica propiciou a obtenção, a partir de um mesmo animal, de várias desovas, sendo que cada fêmea pode ovular em intervalos de, aproximadamente, 45 dias.

Fertilização e desenvolvimento embrionário: Morfometria e análise estereomicroscópica dos ovos dos híbridos de surubins (pintado, Pseudoplatystoma corruscans x cachara, Pseudoplatystoma fasciatum)

This study aimed to analyze the morphometry of hybrids' eggs under stereomicroscopy. The induced reproduction was carried out in specimens of pintado's females (P. corruscans) and cachara's males (P. fasciatum) from Cepta - Ibama, Pirassununga, state of São Paulo, Brazil. Samples were collected in extrusion moment, during the fertilization, in times of 10 and 30 seconds, 1, 2, 5, 8, 10, 15, 20, 30 and 45 minutes, 1 hour, at every 15 minutes until completing 2 hours, and afterwards, at every hour until the larval hatching. Oocytes and eggs' external morphology were observed, photographed and 30 samples from each moment were measured in stereomicroscopy. Oocytes, in the time of extrusion, and the eggs presented a spherical form and yellowish color. Characteristics such as wide perivitelinic space, somites, presence of optical vesicle and the main phases of embryonic development as egg-cell (blastodisc), 2, 4, 8, 16, 32 and 64 blastomeres, morula, blastula, gastrula, epiboly movements, formation and larvae hatching were verified.

Determinação da atividade sérica de enzimas hepáticas e da concentração de uréia, creatinina, cortisol, imunoglobulina G dos valores hemogasométricos de bezerros da raça Nelore oriundos de fertilização in vivo (FV) e fertilização in vitro (FIV)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biological performance of a polycaprolactone-based scaffold used as fusion cage device in a large animal model of spinal reconstructive surgery

A bioactive and bioresorbable scaffold fabricated from medical grade poly (epsilon-caprolactone) and incorporating 20% beta-tricalcium phosphate (mPCL–TCP) was recently developed for bone regeneration at load bearing sites. In the present study, we aimed to evaluate bone ingrowth into mPCL–TCP in a large animal model of lumbar interbody fusion. Six pigs underwent a 2-level (L3/4; L5/6) anterior lumbar interbody fusion (ALIF) implanted with mPCL–TCP þ 0.6 mg rhBMP-2 as treatment group while four other pigs implanted with autogenous bone graft served as control. Computed tomographic scanning and histology revealed complete defect bridging in all (100%) specimen from the treatment group as early as 3 months. Histological evidence of continuing bone remodeling and maturation was observed at 6 months. In the control group, only partial bridging was observed at 3 months and only 50% of segments in this group showed complete defect bridging at 6 months. Furthermore, 25% of segments in the control group showed evidence of graft fracture, resorption and pseudoarthrosis. In contrast, no evidence of graft fractures, pseudoarthrosis or foreign body reaction was observed in the treatment group. These results reveal that mPCL–TCP scaffolds could act as bone graft substitutes by providing a suitable environment for bone regeneration in a dynamic load bearing setting such as in a porcine model of interbody spine fusion.

The evaluation of a biphasic osteochondral implant coupled with an electrospun membrane in a large animal model

Conventional clinical therapies are unable to resolve osteochondral defects adequately, hence tissue engineering solutions are sought to address the challenge. A biphasic implant which was seeded with Mesenchymal Stem Cells (MSC) and coupled with an electrospun membrane was evaluated as an alternative. This dual phase construct comprised of a Polycaprolactone (PCL) cartilage scaffold and a Polycaprolactone - Tri Calcium Phosphate (PCL - TCP) osseous matrix. Autologous MSC was seeded into the entire implant via fibrin and the construct was inserted into critically sized osteochondral defects located at the medial condyle and patellar groove of pigs. The defect was resurfaced with a PCL - collagen electrospun mesh that served as a substitute for periosteal flap in preventing cell leakage. Controls either without implanted MSC or resurfacing membrane were included. After 6 months, cartilaginous repair was observed with a low occurrence of fibrocartilage at the medial condyle. Osteochondral repair was promoted and host cartilage degeneration was arrested as shown by the superior Glycosaminoglycan (GAG) maintenance. This positive morphological outcome was supported by a higher relative Young's modulus which indicated functional cartilage restoration. Bone in growth and remodeling occurred in all groups with a higher degree of mineralization in the experimental group. Tissue repair was compromised in the absence of the implanted cells or the resurfacing membrane. Moreover healing was inferior at the patellar groove as compared to the medial condyle and this was attributed to the native biomechanical features.

Monitoring animal behaviour and environmental interactions : GPS collars and satellite remote sensing within a satellite remote sensing context

Remote monitoring of animal behaviour in the environment can assist in managing both the animal and its environmental impact. GPS collars which record animal locations with high temporal frequency allow researchers to monitor both animal behaviour and interactions with the environment. These ground-based sensors can be combined with remotely-sensed satellite images to understand animal-landscape interactions. The key to combining these technologies is communication methods such as wireless sensor networks (WSNs). We explore this concept using a case-study from an extensive cattle enterprise in northern Australia and demonstrate the potential for combining GPS collars and satellite images in a WSN to monitor behavioural preferences and social behaviour of cattle.

Monitoring animal behaviour and environmental interactions using wireless sensor networks, GPS collars and satellite remote sensing

Remote monitoring of animal behaviour in the environment can assist in managing both the animal and its environmental impact. GPS collars which record animal locations with high temporal frequency allow researchers to monitor both animal behaviour and interactions with the environment. These ground-based sensors can be combined with remotely-sensed satellite images to understand animal-landscape interactions. The key to combining these technologies is communication methods such as wireless sensor networks (WSNs). We explore this concept using a case-study from an extensive cattle enterprise in northern Australia and demonstrate the potential for combining GPS collars and satellite images in a WSN to monitor behavioural preferences and social behaviour of cattle.

The design and evaluation of a mobile sensor/actuator network for autonomous animal control

This paper investigates a mobile, wireless sensor/actuator network application for use in the cattle breeding industry. Our goal is to prevent fighting between bulls in on-farm breeding paddocks by autonomously applying appropriate stimuli when one bull approaches another bull. This is an important application because fighting between high-value animals such as bulls during breeding seasons causes significant financial loss to producers. Furthermore, there are significant challenges in this type of application because it requires dynamic animal state estimation, real-time actuation and efficient mobile wireless transmissions. We designed and implemented an animal state estimation algorithm based on a state-machine mechanism for each animal. Autonomous actuation is performed based on the estimated states of an animal relative to other animals. A simple, yet effective, wireless communication model has been proposed and implemented to achieve high delivery rates in mobile environments. We evaluated the performance of our design by both simulations and field experiments, which demonstrated the effectiveness of our autonomous animal control system.

Animal behaviour understanding using wireless sensor networks

This paper presents research that is being conducted by the Commonwealth Scientific and Industrial Research Organisation (CSIRO) with the aim of investigating the use of wireless sensor networks for automated livestock monitoring and control. It is difficult to achieve practical and reliable cattle monitoring with current conventional technologies due to challenges such as large grazing areas of cattle, long time periods of data sampling, and constantly varying physical environments. Wireless sensor networks bring a new level of possibilities into this area with the potential for greatly increased spatial and temporal resolution of measurement data. CSIRO has created a wireless sensor platform for animal behaviour monitoring where we are able to observe and collect information of animals without significantly interfering with them. Based on such monitoring information, we can identify each animal's behaviour and activities successfully

Animal Control - What constitutes a reliable cue to stop animal movement ?

Controlling free-ranging livestock requires low-stress cues to alter animal behaviour. Recently modulated sound and electric shock were demonstrated to be effective in controlling free-ranging cattle. In this study the behaviour of 60, 300 kg Belmont Red heifers were observed for behavioural changes when presented cues designed to impede their movement through an alley. The heifers were given an overnight drylot shrink off feed but not drinking water prior to being tested. Individual cattle were allowed to move down a 6.5 m wide alley towards a pen of peers and feed located 71 m from their point of release. Each animal was allowed to move through the alley unimpeded five times to establish a basal behavioural pattern. Animals were then randomly assigned to treatments consisting of sound plus shock, vibration plus shock, a visual cue plus shock, shock by itself and a control. The time each animal required to reach the pen of peers and feed was recorded. If the animal was prevented from reaching the pen of peers and feed by not penetrating through the cue barrier at set points along the alley for at least 60 sec the test was stopped and the animal was returned to peers located behind the release pen. Cues and shock were manually applied from a laptop while animals were observed from a 3.5 m tower located outside the alley. Electric shock, sound, vibration and Global Position System (GPS) hardware were housed in a neck collar. Results and implications will be discussed.

Poster : Understanding interactions between autonomous animal control and temperament when cattle are subjected to virtual fencing applications

Virtual fencing has the potential to control grazing livestock. Understanding and refi ning the cues that can alter behaviour is an integral part of autonomous animal control. A series of tests have been completed to explore the relationship between temperament and control. Prior to exposure to virtual fencing control the animals were scored for temperament using fl ight speed and a sociability index using contact logging devices. The behavioural response of 30, Belmont Red steers were observed for behavioural changes when presented with cues prior to receiving an electrical stimulation. A control and four treatments designed to interrupt the animal’s movement down an alley were tested. The treatments consisted of sound plus electrical stimulation, vibration plus electrical stimulation, a visual cue plus electrical stimulation and electrical stimulation by itself. The treatments were randomly applied to each animal over fi ve consecutive trials. A control treatment in which no cues were applied was used to establish a basal behavioural pattern. A trial was considered completed after each animal had been retained behind the cue barrier for at least 60 sec. All cues and electrical stimulation were manually applied from a laptop located on a portable 3.5 m tower located immediately outside the alley. The electric stimulation consisted of 1.0 Kv of electricity. Electric stimulation, sound and vibration along with the Global Position System (GPS) hardware to autonomously record the animal’s path within the alley were recorded every second.

Wireless sensor devices for animal tracking and control

This paper describes some new wireless sensor hardware developed for pastoral and environmental applications. From our early experiments with Mote hardware we were inspired to develop our devices with improved radio range, solar power capability, mechanical and electrical robustness, and with unique combinations of sensors. Here we describe the design and evolution of a small family of devices: radio/processor board, a soil moisture sensor interface, and a single board multi-sensor unit for animal tracking experiments.